home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1996 February
/
EnigmA AMIGA RUN 04 (1996)(G.R. Edizioni)(IT)[!][issue 1996-02][Skylink CD III].iso
/
earcd
/
util2
/
gigamon.lha
/
gigamon.doc
< prev
Wrap
Text File
|
1995-10-06
|
4KB
|
82 lines
G I G A M O N I T O R
========================
program written by
Denny Menato
This program is GIFTWARE
so if you use it you
have to send me at least one of this contributions:
- 3.5 Disks (with demos/shareware progs/asm sources etc..)
- Amiga's magazines
- Amiga's documentations
- Amiga's books
- Lots of $$$
- any other thing related to Amiga (for example, an Amiga 4000/060)
at the following address:
MENATO DENNY
VIA SILVIO PELLICO, 29
35031 ABANO TERME (PADOVA)
ITALY
email: bac@marina.dei.unipd.it
PS. Turn off AGA chipset by using the boot menu
PPS. You may send suggestions and I will try to put them in a new version
PPPS. I'm not responsable for any type of damege on your HARDWARE or SOFTWARE,
use this program on your own risc
INTRODUCTION:
This is a very strong monitor that allow you to debug your programs.
Remember that this program DON'T use systems routine, than it isn't
100% stable and than it will CRASH your AMIGA in any time!!!
To active GigaMonitor you have to press HELP key;
NEVER active GigaMonitor while your I/O DEVICES are working!!!!!!
-----------------------------------------------------------------
>>>>>>>>>>>>>>>> USE THIS PROGRAM ON YOUR OWN RISK <<<<<<<<<<<<<<<<<<<<
You can copy this program to your friends but you have to include this
documentation, furthermore you MUST NOT to change any part of the program and
documentation.
-----------------------------
GIGAMONITOR commands:
d MC 68000 disassembler - d(address)
m Show/edit memory as bytes - m address
n Show/edit memory as ASCII - n address
x exit - x
r Show/edit processor registers - r(reg value)
destroy exit and destroy GigaMonitor - destroy
unfreeze Try to unfreeze diskdrives if you have stopped
them activing GigaMonitor while they were working - unfreeze
-----------------------------
GIGAMONITOR key commands:
TAB insert spaces
ESC escape any command
F1 CLR + cursor home
F6 cursor priority over bitplanes
SH F6 bitplanes priority over cursor
F10 Switch screen
POWER-LED is off = ready to execute commands!
Use cursorkeys in combination with shift too
-----------------------------